October 15, 2023
BEL group of companies is working in worldwide with independent logistic centers and distribution systems in USA, Singapore, Israel and Spain.The group was founded in 1966 and rapidly increased its activities in the Composite material production market.BEL combining the resources necessary for design, development and manufacture of advanced composite products from cutting-edge technologies for the chemical and food industries, waste water treatment and water supply. Pressure Vessels for RO Systems – Designed for a wide range of operating pressures (up to 1500 psi).– Flexibility of a Multiple side-port or end-port configuration.– Accommodates up to 8 membranes in each vessel.– Fits to any type of 4″, 4.6″,8″, 9″ & 16″ membrane that are available in the market.– Designed and tested with […]
October 4, 2023
Product Features• For residential and light commercial water treatment applications that require flexibility• Standard polyester or chemical-resistant vinylester construction• Easy to handle and install• 10-year warranty for 6″ to 13″ vessels (softener/filtration applications)• 5-year warranty for 14″ to 16″ vessels (softener/filtration applications)• 2-year warranty for vinylester vessels (deionization applications) Operating Parameters• Maximum operating pressure: 150 psi• Maximum operating temperature:120° F – polyester 150° F – vinylesterPentair Design Parameters• Safety factor: 4:1• Minimum burst at 600 psi• Tested to 250,000 cycles without leakag NSF Design Parameters• Safety factor: 4:1• Minimum burst at 600 psi• Tested to 100,000 cycles without leakage Materials of Construction• Polyester or vinylester
October 4, 2023
• Liner wall thickness available from 0.150″(3.8mm) up to 0.300″(7.6mm) corresponding to the vessel diamete.• Liner wall thickness available from 0.150″(3.8mm) up to 0.300″(7.6mm) corresponding to the vessel diameter• Full choice of pressure vessel available up to 72″ diameter with 94″ height• Top & Bottom openings available for 18″ through 36″ tanks• Maximum Operating Pressure 150 psi (10.5 kgf/cm2)• Maximum Operating Temperature 120F(49°C) 6″-16″ tanks with PE liner 1865-4072 with PE Liner,4872 and above are with FRP liner Special Designs, tanks are with FRP liner
October 4, 2023
Features:– Certified to: NSF/ANSI61, IS09001, CE, PED.– All tank models supplied with a seamless one-piece liner to provide strength, durability and leak-free performance .– Tank diameters from 7″ to 631″ and tank heights from 10″ to 83″.– Vacuum breaker supplied with tanks from 30″ diameter and above. Material– Tank body: FRP filament wound outer shell.– Liner: one-piece seamless PE inner liner, 0.15″ {3.0mm) to 0.3″ {7.6mm) corresponding to the tank diameter.– Base: FRP or reinforced PP.– Opening: 2.5″ & 4″ :reinforced plastic thread.
October 4, 2023
LG Water Solutions, a division of LG Chem, manufactures NanoH2O™ seawater and brackish water reverse osmosis (RO) membrane elements based on the breakthrough Thin-Film Nanocomposite (TFN) technology. Technology Thin Film Nanocomposite (TFN) technology improves membrane performance by embedding benign nanomaterials on the membrane surface. This innovative approach increases flux in seawater RO membranes by up to 20% without compromising salt rejection. Seawater Reverse Osmosis (RO) Membranes LG Water Solutions’ NanoH2O™ seawater RO membranes deliver the industry’s highest salt rejection and 20% more flow than the membranes based on conventional technologies. Our seawater RO membranes significantly reduce the cost of desalination while delivering superior water quality. With state-of-the-art manufacturing and a customer-centric approach, LG Waer Solutions has contracted more than 4,000 […]
October 4, 2023
Digital dosing pump with constant flow rate manually adjustable, proportional flow rate according to an external analog (4÷20 mA) or digital pulse signal (e.g. from water meter). This digital version of the APG, includes additonal characteristics: Timer function, ppm dosing, statistics, password and On/Off input (remote switch).
October 4, 2023
Analogue dosing pump with constant flow rate manually adjustable, proportional flow rate according to an external analogue (4÷20 mA) or digital pulse signal (e.g. from water meter).Control dial (percentage and “n” value in multiplication mode) 6 position adjustable switch:3 in division mode (1, 4, 10 = n)1 in multiplication mode (n=1)1 for proportional 4÷20 mA signal1 for constant functionalitypacing” function adjustable by dip switch
October 4, 2023
Invikta Seriesis a simple yet reliable series of micro-processor based solenoid dosing pumps. Ideal applications are: OEMs, Swimming Pools, Car Wash, Cooling Towers, RO Systems and many other applications.External plastic enclosure in PP with IP65 protection degree protected against jets of water and aggressive environments Wall mounting:– Directly on wall– With fixing bracket– Pump head with manual priming valve– Operation state LED: – Flashing when operating – Slow flashing when pump stops – Fast flashing when low level alarm is activated- Flow rate manual adjustment from 0 (operation stop) to 100% of max. flow rate– Standard 90-265 VAC power supply (20-60 VAC upon request)– Pump can be equipped with low level alarm connection upon request
October 4, 2023
The high quality Codeline pressure vessels are used for reverse osmosis and ultrafiltration processes. They are built to maximize the performance of water treatment and purification systems. The vessels are used in industrial, commercial and municipal water treatment applications across the world. Our extensive pressure vessel portfolio guarantees the right specification for each application. The pressure vessels are widely used for diverse water applications, from industrial water treatment to wastewater treatment, from sea water reverse osmosis to water treatment processes in the Oil & Gas sector. On this page you can find a total overview of our Codeline pressure vessels. To learn more about the features, benefits, parts overview and specifications, click on ‘view product’.
October 4, 2023
PROTEC™ Pressure Vessels are designed for continuous use as housing for membrane filtration elements to purify typical brackish or seawater at any positive pressure up to the specified pressure rating. Protec Membrane Housings will accommodate any make of eight-inch nominal diameter spiral-wound element as well as many hollow fiber elements. The element interface hardware for the specified element is supplied with the vessel. Protec Membrane Housings been designed to meet the standards of the American Society of Mechanical Engineers (ASME), Boiler and Pressure Vessel Code, Section X. At an additional cost, vessels can be inspected during fabrication by an ASME Authorized Inspector and Code stamped. Protec Membrane Pressure Vessels (Membrane Housings) are available in End Port and Side Port Configuration.