A filter housing designed for life-science applications with high sanitary grade

The biotechnology, food and beverage, and pharmaceutical industries frequently utilize gas filtration. These applications all place a high value on purity. Great standards and high purity are necessary, regardless of sterilization or moisture filtration. The gas filter housing works with the filter cartridge to purge particles from high-purity gas. Different filter cartridges are used to fit inside the housing depending on the various demands.

According to sanitany-grade specifications and GMP guidelines, Brother Filtration in-line sanitary filter housing was designed and produced. Applications in the life sciences are widely employed. We advise using the filter housings as a vent or pipe connector because of the top-in and bottom-out flow pattern small form.

Low volume filtration is achieved with an in-line filter housing. 56mm-diameter tiny filter elements will fit in this housing.

Brother Filtration manufactures it with high-quality surface polishing, the internal Ra is 0.3um and the external Ra is 0.4um. We also use sanitary design to prevent entrapment or build-up of contaminants, also all electro-polishing is available for customer’s needs.

A stepped thread divides the threaded sleeve so that the connection tube won’t wave during draining or venting operations. We also enlarge the vent and drain for the housing that the internal diameter connects with an 8mm tube. Brother Filtration uses sectional closure clamps that have a 20% higher pressure endurance than standard clamps and a quick-release closure clamp that enables speedy disassembly.

PTFE o-rings are perfectly sealed by quick-release closure clamps when working at high operating pressure. The maximum operating pressure is 10 bar. Additionally, The filter length can be changed thanks to an adjustable nut on the legs.